HIKOKI MV(36V) 無刷線鋸機 CJ36DA+快速充電器x1個 +MV2.5/5 .0Ahx1粒三件套 HIKOKI
HIKOKI MV(36V) 無刷線鋸機 CJ36DA+快速充電器x1個 +MV2.5/5 .0Ahx1粒三件套 HIKOKI

HIKOKI MV (36V) brushless jigsaw CJ36DA + fast charger x 1 + MV2.5/5.0Ah x 1 three-piece set

sold in last hours
People are viewing this right now
$2,899.00 $2,080.00
Add to Wishlist
Ask a Question
Description

MV(36V) Brushless Wire Saw CJ36DA

CJ36DA pictures

Features

  1. Applicable materials: wood 135mm, low carbon steel plate 10mm, stainless steel 3.2mm
  2. Equipped with brushless motor
ability wood 135mm
Low carbon steel plate 10mm
Stainless steel 3.2mm
Number of strokes 800-3,500/min (times/min)
Stroke 26mm
Minimum cutting radius 25mm (without guide plate)
Inclined cutting angle Left and right 0-45°
Body size (length x height x width) 277×206×81mm (including BSL36A18)
weight 2.7kg (including BSL36A18, excluding blade)
Available batteries MV battery (with remaining power display)
Battery MV model BSL36A18
Voltage capacity 36V-2.5Ah / 18V-5.0Ah
Charging time About 32 minutes (using UC18YSL3)
charger Model Name

UC18YSL3 (with cooling function)

Cutting speed comparison (standard) *2

  • Cutting conditions:
    MDF (T24mm); Blade used: No. 41; Track position: III;

    Speed: Maximum; Thrust: 20N

    Cutting conditions:
    SPCC (T2mm); Blade used: No. 123X; Track position: I ;

    Speed: 3; Thrust: 20N

High load cutting

    • Vibration value is about 1/3 *2 Smooth cutting, low vibration value
    • High thrust for cutting under heavy loads

    Cutting conditions:
    SPF (2 x 12); Blade used: No. 41; Track: Max;

    Speed: Maximum; Thrust: 30N (excluding its own weight)

    In the curve graph, the vertical axis is the vibration value and the horizontal axis is the thrust. Compared with our AC motor CJ160V, the vibration value of CJ36DA is about 1/3, and the thrust is also close to the high value of 50N.
  1. As of October 2019. At domestic power tool manufacturers in Japan (according to our research)
  2. Our conventional products: compared with the wire saw machine CJ160V. The values ​​are for reference only. Depends on material and conditions.

Automatic mode function to easily match the ink line at the start of low-speed cutting

When a load is applied, the stroke rate automatically switches from 1400 /min (times/min) to 3500 /min (times/min) to maintain the same stroke rate as the turntable 5.

Starting with low vibration (1,400 min-1), the stroke rate increases as load is applied after the start of cutting and maintains the same full speed as the turntable 5 (3,500 min-1).

Two modes can be selected according to the purpose

  • Adjustment dial
    model dial Number of strokes (standard)
    Normal mode 1-5 800-3,500/min (stepless)
    Automatic mode A No-load: 1400/min (times/min)
    Load: 3500/min (times/min)

Constant speed control to keep the number of strokes constant

Tool-free saw blade replacement

  • The saw blade can be installed and removed without the use of tools.
    Tool-free blade replacement
Reviews