TOUGHBUILT TB-B1S3-M-20 2-Wall Mount Tool Box with Shelves Metal Bracket StackTech - ToughBuilt

TOUGHBUILT TB-B1S3-M-20 2-Tier Shelving System

Specification

• Product: 2-tier rack system
• Model: TB-B1S3-M-20

• Specification

  
  

  • Product: 2-tier rack system
  • Model: TB-B1S3-M-20

  
  

  Assembly Instructions

  Please read and follow the instructions carefully before assembling and using this product.

  Package Contents

  

  • Axe ×2
  • Diameter × 2
  • Width × 4
  • C×8

  
  

  Tools Required (Not Included)

  You will need the following assembly tools (not included in the package):

  • Mounting hardware appropriate for your wall material type
  Warnings and Precautions
  • WARNING: Wear eye protection and appropriate clothing when assembling and using this product. Avoid distractions and keep pets and children away from the work area.
  • WARNING: The E-Track (D) must be properly secured and capable of supporting a 100 lb load. Use mounting hardware appropriate for the type of wall material.
  • WARNING: Do not step on the shelf.
  • NOTE: Maximum load per rack is 50 lbs. Distribute the weight evenly and place heavier loads on the bottom rack.
  • NOTE: The rack is secured to the E-track (D) by means of locking bolts.
  • CAUTION: Do not modify this product in any way.
  Important! Read all safety warnings and all instructions before use. TOUGHBUILT® INDUSTRIES, INC. is subject to change without notice and without obligation and may differ from the content in this manual.

  
  

  Assembly Instructions

  Installing the E-rail The E-track (D) must be properly secured and capable of supporting a 100 lb load. Wall mount hardware not included. Use mounting hardware appropriate for the type of wall material. If necessary, consult a professional for assistance. Assembling shelves Please follow the steps below to assemble the shelf:

  1. Place two A blocks parallel to each other.
  2. Attach the two B pieces to the ends of the A piece.
  3. Connect the four C pieces to the corners of the A and B pieces.
  Installing Shelves Please follow the steps below to install the shelf:
  1. Press and hold the D tab on the E rail (D).
  2. Place the assembled shelf on top of the E-track (D) and insert the D-tabs into the corresponding slots.
  Fixed shelf To secure the rack, follow these steps:
  1. Tighten the bolts until they contact the E-track (D). Do not overtighten.
  2. To remove the shelf, loosen the bolts.
  3. Loosen the bolts to remove the shelf.
  2-Tier Shelving System | TB-B1S3-M-20