限時優惠香港行貨HiKOKI 18V 無刷四溝鎚鑽 SDS-PLUS 26mm DH1826DA+ 快速充電器x1個 +MV2.5/5 .0Ahx1粒三件套 HiKOKI
限時優惠香港行貨HiKOKI 18V 無刷四溝鎚鑽 SDS-PLUS 26mm DH1826DA+ 快速充電器x1個 +MV2.5/5 .0Ahx1粒三件套 HiKOKI

Limited time offer Hong Kong licensed HiKOKI 18V brushless four groove hammer drill SDS-PLUS 26mm DH1826DA + fast charger x1 + MV2.5/5.0Ahx1 three-piece set

sold in last hours
People are viewing this right now
HK$2,899.00 HK$1,980.00
Add to WishlistCompare
Ask a Question
Description

DH1826DA pictures

Features

  1. SDS-PLUS Drill Bits
  2. Brushless DC Motor
  3. Three mode switching

Brushless MotorSDS plas

Specification

model DH1826DA
ability Concrete drill bit 3.4～26mm
Mild Steel 13mm
wood 27mm
Hole drill bit 25-50mm
Diamond drill bits 65mm
Impact energy 3.2J
No-load revolutions Normal mode : 0～950/min
Low speed mode : 0～700/min
Full load strike number Normal mode : 0～4,300/min
Low speed mode : 0～3,170/min
Body size (length x height x width) 356×233×91mm
(Battery installed) 		498 x 247 x 105mm
(Install dust collection system and battery)
weight 3.7kg ( including battery ) 4.7kg ( including dust collection system and battery)
Available batteries MV battery series, BSL18XX battery series
Standard accessories Battery pack, charger, side handle, depth gauge, battery cover
  1. The dust collection system must be purchased separately (see the optional accessories information below).
  2. Battery charging time depends on the ambient temperature and the condition of the battery.
  3. NOTE: The manufacturer reserves the right to change parts and accessories specifications etc. without prior notice.

Low vibration

UVP

The low-vibration grip offers rubber handle dampeners to absorb vibration and shock during operation.

Patented automatic stop function

  • Equipped with "Auto Stop Function", which is very useful when drilling continuously. The drilling time can be memorized and the motor will be automatically stopped when the memorized time is reached to maintain a fixed drilling operation.

    For example, if it takes 10 seconds for the switch to go from on to off, the 10 seconds will be memorized and the machine will automatically stop after 10 seconds the next time you drill.
Please note
The automatic stop function remembers the drilling time but does not guarantee the drilling depth. Due to differences and changes in working posture, pressure applied to the machine, and working materials,
The drilling depth may not be fixed. Use a depth gauge to reduce deviations in drilling depth.

With reaction force control function (RFC)

  • When a load is suddenly applied to the front end of the drill bit, the slip clutch will be activated, or the controller in the tool body will stop the motor, reducing the shaking of the tool body.

Please note
Depending on the circumstances and conditions during the work, the RFC may not be able to operate. To ensure the stability of the tool body, hold the tool body firmly.

Easy installation and removal without removing the drill bit

The dust collection system can be installed and removed with the drill bit already installed.

Installing and removing the dust collection system

Simple operation panel

You can easily switch between modes with just a tap.

Operation panel description

Two-stage switching of rotation number

The switch is operated by a button, and the number of rotations and strikes can be reduced according to the work content.
Easier to drill holes in fragile materials.

model Low speed Normal
Indicator Light Status
Number of revolutions 0 ~ 700 /min 0 ~ 950 /min
Number of hits 0 ~ 3,170 /min 0 ~ 4,300 /min

3 modes can be switched according to the application situation

Use the mode selector lever to switch between three modes according to the operation requirements.

Rotation mode flag Rotation Metal and wood drilling
Spin + strike mode logo Rotation + Hammer Concrete drilling
Strike Mode Marker Hammer Chiseling and grooving of concrete, etc.

High brightness LED lamp

Equipped with high-brightness LED lights, it is easy to see the target area and work smoothly. Release your finger from the switch and the light will automatically turn off after about 10 seconds.

  • Irradiation is not possible when using the dust collection system.
Equipped with LED light

Can be installed with hook (purchased separately - optional)

Product code: 379770

A large hook can be connected to make the product more convenient to use.

Hook for a long time

Adopt switches with improved dust and water resistance

The switch housing is laser welded to create gaps, improving dust and water resistance.

Work per Charge (approximately) *

Job Description Battery level Work per Charge (approximately) *
Concrete drilling (40 mm deep) Drill bit diameter 12.5mm 5.0Ah About 65
Drill bit diameter 18mm About 30
  • The values ​​are for reference only and may vary depending on materials and conditions.

Optional accessories can be purchased separately

  • Dust collection system (special for concrete drilling)


    Product code:     56379135 (Carton) 56379136 (No.2 Stacking Box)

    Dust collection capacity 0.45L
    Maximum stroke 100 mm
    Available drill bits Drill diameter: 4.3~20mm
    Effective length: less than 100mm
    Dimensions (W x H x D) 105×243×366 mm
    weight 1.0 kg
    Applicable models DH3628DA、DH1826DA

Reviews