[Limited time special offer, Hong Kong licensed goods] Japan HIKOKI high one (HITACHI Hitachi) brushless DH1826DA hammer drill four groove 26mm 18V hammer drill SDS-PLUS drilling-clean machine

Normal mode : 0～4,300/min
Low speed mode : 0～3,170/min

1. The dust collection system must be purchased separately (see the optional accessories information below).
2. Battery charging time depends on the ambient temperature and the condition of the battery.
3. NOTE: The manufacturer reserves the right to change parts and accessories specifications etc. without prior notice.

4. Low vibration

   

   The low-vibration grip offers rubber handle dampeners to absorb vibration and shock during operation.

   Patented automatic stop function

   • Equipped with "Auto Stop Function", which is very useful when drilling continuously. The drilling time can be memorized and the motor will be automatically stopped when the memorized time is reached to maintain a fixed drilling operation.

     

   Please note

   The automatic stop function remembers the drilling time but does not guarantee the drilling depth. Due to differences and changes in working posture, pressure applied to the machine, and working materials,
   The drilling depth may not be fixed. Use a depth gauge to reduce deviations in drilling depth.

   With reaction force control function (RFC)

   • When a load is suddenly applied to the front end of the drill bit, the slip clutch will be activated, or the controller in the tool body will stop the motor, reducing the shaking of the tool body.

   Please note

   Depending on the circumstances and conditions during the work, the RFC may not be able to operate. To ensure the stability of the tool body, hold the tool body firmly.

   Easy installation and removal without removing the drill bit

   The dust collection system can be installed and removed with the drill bit already installed.

   Dust collector sold separately

   Simple operation panel

   You can easily switch between modes with just a tap.

   

   Two-stage switching of rotation number

   The switch is operated by a button, and the number of rotations and strikes can be reduced according to the work content.
   Easier to drill holes in fragile materials.

   model	Low speed	Normal
   Indicator Light Status
   Number of revolutions	0 ~ 700 /min	0 ~ 950 /min
   Number of hits	0 ~ 3,170 /min	0 ~ 4,300 /min

   3 modes can be switched according to the application situation

   Use the mode selector lever to switch between three modes according to the operation requirements.

   	Rotation	Metal and wood drilling
   	Rotation + Hammer	Concrete drilling
   	Hammer	Chiseling and grooving of concrete, etc.

   High brightness LED lamp

   Equipped with high-brightness LED lights, it is easy to see the target area and work smoothly. Release your finger from the switch and the light will automatically turn off after about 10 seconds.

   • Irradiation is not possible when using the dust collection system.

   

   Hook can be installed (optional)

   Product code: 379770
   

   A large hook can be connected to make the product more convenient to use.

   

   Adopt switches with improved dust and water resistance

   The switch housing is laser welded to create gaps, improving dust and water resistance.

   Work per Charge (approximately) ^*

   Job Description		Battery level	Work per Charge (approximately) *
   Concrete drilling (40 mm deep)	Drill bit diameter 12.5mm	5.0Ah	About 65
   	Drill bit diameter 18mm		About 30

   • The values ​​are for reference only and may vary depending on materials and conditions.