HiKOKI DH3628DA(H4Z) 36V 鋰離子無線無刷 SDS Plus 電鎚 - 僅工具 HiKOKI
HiKOKI DH3628DA(H4Z) 36V 鋰離子無線無刷 SDS Plus 電鎚 - 僅工具 HiKOKI

HiKOKI 36V Brushless Four Groove Hammer Drill SDS-PLUS 28mm Empty Machine DH3628DA (Clean Machine)

sold in last hours
People are viewing this right now
HK$1,980.00 HK$1,400.00

style: net machine

net machine
Online ordering
Description

  1. HiKOKI 36V Brushless Four Groove Hammer Drill SDS-PLUS 28mm Empty Machine DH3628DA

    Low vibration

    UVP

    Vibration is reduced through the anti-vibration grip and dynamic shock absorber, giving it a good feel when used.

    Vibration value comparison (reference) * 3-axis composite value (m/s 2 )

    Reduced vibration values ​​compared to conventional products

    Location of dynamic vibration absorbers, springs, anti-vibration handles, and dampers

    • The values ​​are for reference only and may vary depending on materials and conditions.

    Industry's first * vertical auxiliary LED function

    LED vertical support function

    Drill vertically with the help of vertical auxiliary LED.

    Green light on when vertical

    Location of dynamic vibration absorbers, springs, anti-vibration handles, and dampers

    Please note
    The function of the vertical auxiliary LED is to display the horizontal/vertical plane relative to the direction of gravity, not perpendicular to the inclined plane. For surfaces that are relatively perpendicular to gravity, such as walls, it detects a range of 5 degrees above and below the target surface, but does not detect the left and right sides of the target surface. Also, it does not light up while drilling (when the switch is pulled). Please use to check the angle of the tool body before and after drilling.
    • As of October 2022. A survey of hammer drills among Japanese power tool manufacturers

    Patented automatic stop function

    • Equipped with "Auto Stop Function", which is very useful when drilling continuously. The drilling time can be memorized and the motor will be automatically stopped when the memorized time is reached to maintain a fixed drilling operation.

      For example, if it takes 10 seconds for the switch to go from on to off, the 10 seconds will be memorized and the machine will automatically stop after 10 seconds the next time you drill.
    Please note
    The automatic stop function remembers the drilling time but does not guarantee the drilling depth. Due to differences and changes in working posture, pressure applied to the machine, and working materials,
    The drilling depth may not be fixed. Use a depth gauge to reduce deviations in drilling depth.

    With reaction force control function (RFC)

    • When a load is suddenly applied to the front end of the drill bit, the slip clutch will be activated, or the controller in the tool body will stop the motor, reducing the shaking of the tool body.

    Please note
    Depending on the circumstances and conditions during the work, the RFC may not be able to operate. To ensure the stability of the tool body, hold the tool body firmly.

    Easy installation and removal without removing the drill bit

    The dust collection system can be installed and removed with the drill bit already installed.

    Installing and removing the dust collection system

    Simple operation panel

    You can easily switch between modes with just a tap.

    Operation panel description

    Two-stage switching of rotation number

    The switch is operated by a button, and the number of rotations and strikes can be reduced according to the work content.
    Easier to drill holes in fragile materials.

    model Low speed Normal
    Indicator Lights
    Lighting status
    Number of revolutions 0 ~ 700 /min 0 ~ 950 /min
    Number of hits 0 ~ 3,170 /min 0 ~ 4,300 /min

    3 modes can be switched according to the application situation

    Use the mode selector lever to switch between three modes according to the operation requirements.

    Rotation mode flag Rotation Metal and wood drilling
    Spin + strike mode logo Rotation + Hammer Concrete drilling
    Strike Mode Marker Hammer Chiseling and grooving of concrete, etc.

    High brightness LED lamp

    Equipped with high-brightness LED lights, it is easy to see the target area and work smoothly. Release your finger from the switch and the light will automatically turn off after about 10 seconds.

    • Irradiation is not possible when using the dust collection system.
    Equipped with LED light

    Hook can be installed (optional)

    Product code: 379770

    A large hook can be connected to make the product more convenient to use.

    Hook for a long time

    Adopt switches with improved dust and water resistance

    The switch housing is laser welded to create gaps, improving dust and water resistance.

    Work per Charge (approximately) *

    Job Description Battery level Work per Charge (approximately) *
    Concrete drilling
    (40 mm deep)
    Drill bit diameter 12.5mm 2.5Ah (MV) About 75
    Drill bit diameter 18mm About 40
    • The values ​​are for reference only and may vary depending on materials and conditions.

    Product Features

    • SDS-PLUS Drill Bits
    • Brushless DC Motor
    • Three mode switching
    • Model:DH3628DA(NN)

      Specification:

      Concrete drill bit: 3.4~28mm
      Mild steel: 13mm
      Wood:32mm
      Drill bit: 25-50mm
      Diamond drill bit: 65mm
      Impact energy: 3.2J
      No-load revolutions:
      Normal mode: 0~950/min
      Low speed mode: 0~700/min
      Full load hits:
      Normal mode: 0~4,300/min
      Low speed mode: 0~3,170/min
      Body size (length x height x width): 351*220*85mm (with battery installed)

      Function:

      SDS-PLUS drill bits.

      Brushless DC motor.

      Three modes to switch.

      Contents: Host*1, Depth Gauge*1

      Product Specifications

      brand Hitachi HIKOKI
      type Multi-piece repair tool set
      model DH3628DA(NN)
      Material Metal, plastic shell, iron
      Number of contents 1

    Optional accessories:

    • Dust collection system (special for concrete drilling)



      Dust collection capacity 0.45L
      Maximum stroke 100 mm
      Available
      drill
      Drill diameter: 4.3~20mm
      Effective length: less than 100mm
      Dimensions (W x H x D) 105×243×366 mm
      weight 1.0 kg
      Applicable models DH3628DA、DH1826DA

    We provide brand new products and provide the following guarantees:
    - Warranty period: One year warranty
    - Warranty coverage: New product defects

    Customer Service Center: The product warranty period calculation method of our customer service center is based on the date of your purchase invoice in our store.

    ◆ When the product is repaired for the first time, please present our store’s product purchase invoice to facilitate the repair service.
    ◆ We are unable to provide warranty services for products not sold by our company.

Additional Information
style

net machine, Online ordering