HIKOKI MV (36V) cement vibrator UV3628DA + fast charger x 1 + MV2.5/5.0Ah x 1 three-piece set - Hong Kong licensed
Features
- Work faster and save more time compared to plug-in products*
- Mode switch (powerful mode/normal mode)
- *Compared with our conventional product cement vibrator (UV28M), the figures are reference values, depending on materials and conditions.
Specifications
| Assembly | Diameter 28mm, after assembly 825mm | ||
|---|---|---|---|
| No-load vibration number | 12,000 / 15,200/min (12,000 / 15,200 times/min) | ||
| motor | Brushless Motor | ||
| Body size (length x height x width) | 1,045 × 224 × 109mm | ||
| weight | 4.2kg (including battery) | ||
| Battery available | MV Battery | ||
| Battery | MV | model | BSL36B18 |
| Voltage | 36V-4.0Ah / 18V-8.0Ah | ||
| Charging time ※1 | About 52 minutes | ||
| charger | model | UC18YSL3 | |
| Standard accessories | Charger (UC18YSL3), battery (BSL36B18), battery cover | ||
- Charging time may be longer depending on ambient temperature and the condition of the battery.
- NOTE: The manufacturer reserves the right to change specifications of parts and accessories without prior notice.
Faster working efficiency and shorter working time than plug-in products
-
The combination of MV battery + brushless motor + ø28 diameter vibration rod has the largest working capacity *1 and operates faster than AC products *2 .
Comparison of cement pouring (casting)/compacting operation time (reference) *3
Working conditions: Ready-mixed cement (slump value *4 18 cm) is placed on a 1,000 x 2,000 x 200 mm template and the time required for a series of compaction operations is compared and verified.
- As of April 2020. At a domestic power tool manufacturer (according to our research) (cordless cement vibrator)
- Comparison with our traditional products: Cement Vibrator UV28M. These figures are reference values. It depends on the material and conditions.
- These figures are reference values. It depends on the material and conditions.
- Slump is the amount of cement that falls when it is placed in a conical container (slump cone) and gently pulled up, indicating the hardness of the cement.
Mode switching, sufficient working time
Suitable for a wide range of operations Powerful mode speed: 15,200/min (15,200 times/minute)
For delicate work Normal mode speed: 12,000/min (12,000 times/minute)
Work per Charge (Typical)*
| Ah | Work per Charge (Typical)* | |
|---|---|---|
| Powerful Mode | Normal mode | |
| 4.0Ah (MV) | About 45 minutes | About 60 minutes |
- These figures are guide values and depend on material and conditions.
Protection from cement contamination
-
Battery protection cover
Prevents malfunctions caused by cement adhering to battery contact points.
-
Trigger switch dust cover
Prevents malfunctions caused by cement adhering to the trigger switch.
-
Intake and exhaust
Since the air inlet and outlet ports are located at the front of the main machine, cement is unlikely to adhere to the ports even if the main machine is placed aside during operation.
