Frequently Bought Together
18V Brushless Four-Flute Hammer Drill SDS-PLUS 26mm DH1826DA
feature:
- High drilling speed and chiseling performance with impact energy of 3.2 Joules
- UVP (User Vibration Protection) - Dynamic shock absorbers and low-vibration handles
- RFC (Reaction Force Control) prevents excessive tool vibration
Specification:
- Voltage: 36V
- Motor type: Brushless
- Switch type: Variable speed trigger switch
- Impact energy: 3.2
-
Drilling scope capacity:
- Concrete drill bit: 3.4-28mm
- Concrete core drill bit: 25-50mm
- Steel: 13mm
- Wood: 32mm
- Full load shock rate: 0-4,300bpm
- No-load speed: 0-950rpm
-
3 operating modes:
- hammer only
- Drill holes only
- Hammering/drilling
- Dimensions (LxWxH): 356mm x 91mm x 232mm
- Weight: 3.9kg
Features
- SDS-PLUS drill bit
- Brushless DC motor
- Switch between three modes
-
DH1826DA ability Mixed soil drill bit 3.4～26mm mild steel 13mm wood 27mm Hole drill bit 25-50mm diamond drill bits 65mm impact energy 3.2J Number of revolutions without load Normal mode : 0～950/min
Low speed mode : 0～700/minFull load hits Normal mode : 0～4,300/min
Low speed mode : 0～3,170/minBody size (length x height x width) 356×233×91mm
(battery installed)498 x 247 x 105mm
(Install dust collection system and battery)weight 3.7kg ( including battery ) 4.7kg ( including dust collection system and battery) Available batteries MV battery series, BSL18XX battery series - The dust collection system needs to be purchased separately (see optional accessories information below).
- The battery is sold separately and the charging time depends on the ambient temperature and the condition of the battery.
- Note: The manufacturer reserves the right to change parts and accessories specifications, etc. without prior notice.
Low vibration
Low-vibration grip provides rubber handle dampeners to absorb shock and shock during operation.
Patented automatic stop function
-
Equipped with "auto stop function", which is very useful when drilling continuously. It can memorize the drilling time and automatically stop the motor when the memorized time is reached to maintain fixed drilling operations.
Please note
The auto-stop feature remembers drilling time but does not guarantee drilling depth. Due to differences and changes in working posture, pressure applied to the machine, and work materials,
Drilling depth may not be fixed. Use a depth gauge in conjunction with the drill to reduce variations in drilling depth.With reaction force control function (RFC)
-
When a load is suddenly applied to the front end of the drill bit, the sliding clutch will be activated, or the controller in the tool body will stop the motor to reduce the shaking of the tool body.
Please note
Depending on circumstances and conditions during work, the RFC may not be operational. To ensure the stability of the tool body, please hold the tool body firmly.Easy to install and remove without removing the drill bit
The dust collection system can be installed and removed with the drill bit installed.
Simple operation panel
Easily switch modes with just a tap.
Switching between two stages of rotation number
Switching adopts push-button operation, and the number of turns and blows can be reduced depending on the work content.
Easier to drill holes in fragile materials.model low speed normal indicator light
Lighted state
Number of revolutions 0~700/min 0~950/min Number of hits 0~3,170/min 0~4,300/min According to the application situation, 3 modes can be switched
Use the mode selector lever to switch between three modes according to work needs.
rotate Drilling holes in metal and wood 
Spin + Hammer Drilling holes in concrete etc. 
hammering Chiseling and grooving of concrete, etc. High brightness LED light
Equipped with high-brightness LED lights, it is easy to see the target area and work smoothly. Release your finger from the switch and the light will turn off automatically after about 10 seconds.
- Irradiation is not possible when using a dust collection system.
Hooks can be installed (optional)
Product code: 379770
A large hook can be connected to make the product more convenient to use.
Adopts a switch that improves dustproof and waterproof performance
The switch housing uses laser for gap-free welding to improve dust resistance and water resistance.
Workload per charge (approximately) *
Work content battery power Workload per charge (approximately) * concrete drilling
(40 mm deep)Drill diameter 12.5mm 5.0Ah about 65 Drill bit diameter 18mm about 30 - Values are reference values and may vary depending on materials and conditions.
| style |
net machine, 網上落單 |
|---|